What is portable bag filter?
In two models, the central droplet dust and portable duster
Filter Bag Device (Dust Collector – Dust Collector) Central:
This machine is used to collect dust from production processes. Dust collecting is carried out using a filter bag adapted to the type of user, so that in the filter cabin (filter installation part), a cylinder bag is installed on the top grille and the lower flat panel.
The bags of filters are suspended from the top of the lattice plate, the air, along with the contaminated fluid (dust) from the hopper section, enters the filter bag and passes through it, and the heavy particles inside the hopper flutter and light dust on the inner surface of the bag Filter is collected.
Cleaning the bag compartment by shaking the horizontal web of bags (which holds the bags suspended), produced vibrations produced by the wires on the bags, that the dust on the filter bed is thoroughly cleaned up to the filters and ready to be reused.
The complete dust collector system consists of the following components
Filter bag, filter cleaning system (vibrator), high-velocity fan (preferably 2800 rpm), hopper or dust collector with a fast and simple airborne system, multiple air intakes with different diameters and control panel required ( This method is low cost and without the need for auxiliary equipment, compressor or wind turbine to supply the valves.)
Specifications and performance of the portable filter bag:
The dust contaminated by the inlet channel of the machine in the hopper section is sucked up by the fan mounted in the upper part into the device. A portion of the dust in the hopper section sinks out of the air inside the tank, the smaller particles in the inner surface of the filter sits and the air Clean the fan out of the fan.
By turning off the fan, the filter system (vibrator) automatically enters the circuit and the filter bag is cleaned to prepare the machine for re-use.
Among the advantages of the portable filter bag:
1) Removing design cost – Channel calculations and implementation
2) In the event of a change in the position of machinery, the rotary device can be transmitted at the lowest cost from one location to another, provided that the central system of the total channeling is to be changed.
3) In the event of a bug in the central filter bag, the filtration or collection of dust in the entire factory or production hall is disrupted, while the portable system (single unit) only has one dust collector (collapsible).
Other common denominators for this device are dry dust collectors, bag dust collectors, industrial dust collectors, central dust misters.
